gimprc in 2.10

classic Classic list List threaded Threaded
6 messages Options
Reply | Threaded
Open this post in threaded view
|

gimprc in 2.10

Maurizio Loreti
Hello -
I installed gimp 2.10.0 on my iMac; and edited the related gimprc inserting the two lines

(default-snap-to-grid no)
(default-snap-to-canvas yes)

But these lines have no effect in 2.10 (but worked in 2.8).  What did I miss?  Where may I find the commands allowed in gimprc?

--
Maurizio Loreti  --  [hidden email]




_______________________________________________
gimp-user-list mailing list
List address:    [hidden email]
List membership: https://mail.gnome.org/mailman/listinfo/gimp-user-list
List archives:   https://mail.gnome.org/archives/gimp-user-list
Reply | Threaded
Open this post in threaded view
|

Re: gimprc in 2.10

Alexandre Prokoudine
On Tue, May 22, 2018 at 12:36 PM, Maurizio Loreti wrote:
> Hello -
> I installed gimp 2.10.0 on my iMac; and edited the related gimprc inserting the two lines
>
> (default-snap-to-grid no)
> (default-snap-to-canvas yes)
>
> But these lines have no effect in 2.10 (but worked in 2.8).  What did I miss?  Where may I find the commands allowed in gimprc?

Edit > Preferences > Snapping

Alex
_______________________________________________
gimp-user-list mailing list
List address:    [hidden email]
List membership: https://mail.gnome.org/mailman/listinfo/gimp-user-list
List archives:   https://mail.gnome.org/archives/gimp-user-list
Reply | Threaded
Open this post in threaded view
|

Re: gimprc in 2.10

Partha Bagchi-2
On Tue, May 22, 2018 at 5:48 AM Alexandre Prokoudine <
[hidden email]> wrote:

> On Tue, May 22, 2018 at 12:36 PM, Maurizio Loreti wrote:
> > Hello -
> > I installed gimp 2.10.0 on my iMac; and edited the related gimprc
> inserting the two lines
> >
> > (default-snap-to-grid no)
> > (default-snap-to-canvas yes)
> >
> > But these lines have no effect in 2.10 (but worked in 2.8).  What did I
> miss?  Where may I find the commands allowed in gimprc?
>
> Edit > Preferences > Snapping
>

 On the Mac, the preference is always under the main app header.
_______________________________________________
gimp-user-list mailing list
List address:    [hidden email]
List membership: https://mail.gnome.org/mailman/listinfo/gimp-user-list
List archives:   https://mail.gnome.org/archives/gimp-user-list
Reply | Threaded
Open this post in threaded view
|

Re: gimprc in 2.10

Kevin Payne
In reply to this post by Maurizio Loreti
From: gimp-user-list <[hidden email]> on behalf of Maurizio Loreti <[hidden email]>
>Hello -
>I installed gimp 2.10.0 on my iMac; and edited the related gimprc inserting the two lines
>
>(default-snap-to-grid no)
>(default-snap-to-canvas yes)

>But these lines have no effect in 2.10 (but worked in 2.8).  What did I miss?  Where may I find the commands allowed in >gimprc?

You need to look for the system-wide gimprc, (mine is at  C:\Program Files\GIMP 2.10\etc\gimp\2.0\gimprc<https://mail.gnome.org/archives/gimp-user-list>)
In there you will find examples of all the things you can set.

I believe what you are try to set is now included as part of default-view and default-fullscreen-view :
# Sets the default settings for the image view.  This is a parameter list.
#
# (default-view
#     (show-menubar yes)
#     (show-statusbar yes)
#     (show-rulers yes)
#     (show-scrollbars yes)
#     (show-selection yes)
#     (show-layer-boundary yes)
#     (show-guides yes)
#     (show-grid no)
#     (show-sample-points yes)
#     (snap-to-guides yes)
#     (snap-to-grid no)
#     (snap-to-canvas no)
#     (snap-to-path no)
#     (padding-mode default)
#     (padding-color (color-rgb 1.000000 1.000000 1.000000)))

# Sets the default settings used when an image is viewed in fullscreen mode.
# This is a parameter list.
#
# (default-fullscreen-view
#     (show-menubar yes)
#     (show-statusbar yes)
#     (show-rulers yes)
#     (show-scrollbars yes)
#     (show-selection yes)
#     (show-layer-boundary yes)
#     (show-guides yes)
#     (show-grid no)
#     (show-sample-points yes)
#     (snap-to-guides yes)
#     (snap-to-grid no)
#     (snap-to-canvas no)
#     (snap-to-path no)
#     (padding-mode default)
#     (padding-color (color-rgb 1.000000 1.000000 1.000000)))

_______________________________________________
gimp-user-list mailing list
List address:    [hidden email]
List membership: https://mail.gnome.org/mailman/listinfo/gimp-user-list
List archives:   https://mail.gnome.org/archives/gimp-user-list
Reply | Threaded
Open this post in threaded view
|

gimprc in 2.10

Alussam
>From: gimp-user-list <[hidden email]> on behalf of
>Maurizio Loreti <[hidden email]>
>
>You need to look for the system-wide gimprc, (mine is at  C:\Program
>Files\GIMP
>2.10\etc\gimp\2.0\gimprc<https://mail.gnome.org/archives/gimp-user-list>)
>In there you will find examples of all the things you can set.
>
>I believe what you are try to set is now included as part of
>default-view and default-fullscreen-view :
># Sets the default settings for the image view.  This is a parameter
>list.
>#
># (default-view
>#     (show-menubar yes)
>#     (show-statusbar yes)
>#     (show-rulers yes)
>#     (show-scrollbars yes)
>#     (show-selection yes)
>#     (show-layer-boundary yes)
>#     (show-guides yes)
>#     (show-grid no)
>#     (show-sample-points yes)
>#     (snap-to-guides yes)
>#     (snap-to-grid no)
>#     (snap-to-canvas no)
>#     (snap-to-path no)
>#     (padding-mode default)
>#     (padding-color (color-rgb 1.000000 1.000000 1.000000)))
>
># Sets the default settings used when an image is viewed in fullscreen
>mode.
># This is a parameter list.
>#
># (default-fullscreen-view
>#     (show-menubar yes)
>#     (show-statusbar yes)
>#     (show-rulers yes)
>#     (show-scrollbars yes)
>#     (show-selection yes)
>#     (show-layer-boundary yes)
>#     (show-guides yes)
>#     (show-grid no)
>#     (show-sample-points yes)
>#     (snap-to-guides yes)
>#     (snap-to-grid no)
>#     (snap-to-canvas no)
>#     (snap-to-path no)
>#     (padding-mode default)
>#     (padding-color (color-rgb 1.000000 1.000000 1.000000)))


So, does this mean that lines with # at the start are no longer comments and now
actual code? Or had it always been that way?

--
Nivek (via www.gimpusers.com/forums)
_______________________________________________
gimp-user-list mailing list
List address:    [hidden email]
List membership: https://mail.gnome.org/mailman/listinfo/gimp-user-list
List archives:   https://mail.gnome.org/archives/gimp-user-list
Reply | Threaded
Open this post in threaded view
|

Re: gimprc in 2.10

Patrick Shanahan-3
* Nivek <[hidden email]> [01-28-20 19:55]:

> >From: gimp-user-list <[hidden email]> on behalf of
> >Maurizio Loreti <[hidden email]>
> >
> >You need to look for the system-wide gimprc, (mine is at  C:\Program
> >Files\GIMP
> >2.10\etc\gimp\2.0\gimprc<https://mail.gnome.org/archives/gimp-user-list>)
> >In there you will find examples of all the things you can set.
> >
> >I believe what you are try to set is now included as part of
> >default-view and default-fullscreen-view :
> ># Sets the default settings for the image view.  This is a parameter
> >list.
> >#
> ># (default-view
> >#     (show-menubar yes)
> >#     (show-statusbar yes)
> >#     (show-rulers yes)
> >#     (show-scrollbars yes)
> >#     (show-selection yes)
> >#     (show-layer-boundary yes)
> >#     (show-guides yes)
> >#     (show-grid no)
> >#     (show-sample-points yes)
> >#     (snap-to-guides yes)
> >#     (snap-to-grid no)
> >#     (snap-to-canvas no)
> >#     (snap-to-path no)
> >#     (padding-mode default)
> >#     (padding-color (color-rgb 1.000000 1.000000 1.000000)))
> >
> ># Sets the default settings used when an image is viewed in fullscreen
> >mode.
> ># This is a parameter list.
> >#
> ># (default-fullscreen-view
> >#     (show-menubar yes)
> >#     (show-statusbar yes)
> >#     (show-rulers yes)
> >#     (show-scrollbars yes)
> >#     (show-selection yes)
> >#     (show-layer-boundary yes)
> >#     (show-guides yes)
> >#     (show-grid no)
> >#     (show-sample-points yes)
> >#     (snap-to-guides yes)
> >#     (snap-to-grid no)
> >#     (snap-to-canvas no)
> >#     (snap-to-path no)
> >#     (padding-mode default)
> >#     (padding-color (color-rgb 1.000000 1.000000 1.000000)))
>
>
> So, does this mean that lines with # at the start are no longer comments and now
> actual code? Or had it always been that way?

usually when a setting is indicated and commented out, means that is
default and is set, ie:

# (snap-to-path no)
snap-to-path is set to "no" and that is default.

--
(paka)Patrick Shanahan       Plainfield, Indiana, USA          @ptilopteri
http://en.opensuse.org    openSUSE Community Member    facebook/ptilopteri
Photos: http://wahoo.no-ip.org/piwigo                    paka @ IRCnet freenode
_______________________________________________
gimp-user-list mailing list
List address:    [hidden email]
List membership: https://mail.gnome.org/mailman/listinfo/gimp-user-list
List archives:   https://mail.gnome.org/archives/gimp-user-list